Issue No. 1.5
12 - 20
2.
Plug the tabs marked A and B into adapter slots, then snap the
tab on the other end of the adapter into the receptacle marked C.
Refer to
Figure 12-26 Attaching the CT(U)-R( ) Unit to the
Multiline Terminal on page
Figure 12-26 Attaching the CT(U)-R( ) Unit to the Multiline Terminal
3.
Replace the base plate (or wall mount unit) and attach the line
cord. Refer to
Section 3 Connecting a Multiline Terminal to the
System on page
4.
Attach the AC-2R/AC-3R to the CT(U)-R( ) Unit. Refer to
12-5 Connecting the AC Adapter to an Installed Adapter on page
12-4.
UNIVERGE SV8100/SV8300
12-20.
11-8.
term
Installing D
Series i Optional Equipment
Figure