UNIVERGE SV8100/SV8300
System Hardware Manual
Figure 12-7 Connecting a Multiline Terminal to a Recording Device using an
AD(A)-R( ) Unit (Example)
the ESI(8)-U( ) ETU and to the recording device.
ESI
ETU
Line Cord
(2-line)
Figure 12-7 Connecting a Multiline Terminal to a Recording Device using an
When installing the AD(A)-R( ) Unit, connect the cables to the AD(A)-R( ) Unit,
set the dip switches, and then install the AD(A)-R( ) Unit on the multiline
terminal.
3.2.1
Connecting Cables to the AD(A)-R( ) Unit
The first step in installing the AD(A)-R( ) Unit is to connect the cables
between the recording device and the AD(A)-R( ) Unit.
Cable terminal connectors are located on the side of the AD(A)-R( )
Unit. Cables should be connected on this unit before installing the
unit on the multiline terminal.
Cables can be connected to determine whether or not pause control is
provided for the recording.
Recording
Device
Mini-Plug
Earphone
Figure 12-8 AD(A)-R( ) Unit Connection without Pause Control
Mini-Plug
Remote
Recording
Mini-Plug
Device
Line In
Figure 12-9 AD(A)-R( ) Unit Connection with Pause Control
illustrates how the AD(A)-R( ) Unit is connected to
Multiline Terminal + AD(A)-R( ) Unit
AD(A)-R( ) Unit (Example)
Mini-Plug
Connection Cord
CN2
Mini-Plug
Connection Cord
T6 (Shielded Wire)
T7 (Wire)
Mini-Plug
Connection Cord
Issue No. 1.5
Mini-Plug
Mini-Plug
Connection Cord
AD(A)-R( ) Unit
AD(A)-R( ) Unit
CN2
Recording
Device
12 - 5