UNIVERGE SV8100/SV8300
System Hardware Manual
9.
Fit the projections on the side of the PSA-L UNIT into the guide
holes on the side of the terminal and pull toward you until the
PSA-L UNIT snaps into place.
Figure 10-64 Attach PSA-L( ) Unit to the Multiline Terminal
10.
Gently press the serial cable into the grooved cutout for the
cable.
Figure 10-65 Grooved Cutout for Serial Cable
11.
Connect the serial connection cord (refer to
PSA-L( ) Unit to the Multiline Terminal on page
PSA-L UNIT to the terminal body.
12.
Open the Dip Switch Cover (refer to
Connections on page
adapter to the required position. Close the cover.
Cable Groove
Figure 10-60 PSA-L UNIT
10-68). Set the dip switch on the PSA-L( )
Issue No. 1.5
Figure 10-64 Attach
10-71) from the
10 - 71