Table of Contents
Advertisement
The OS installation program will be started up and the recovery operation will be
performed automatically.
* It takes about 20 minutes for the recovery operation. Do not touch the keyboard
during the recovery operation.
* In the event that an error dialog ["FACTORY. EXE" Failed to install net work
adaptor - check WINBOM.] appears, press [OK] and go to the next step.
* In the case that OS Installation Program is not executed:
Due to USB CD drive failure, the OS installation program might not be executed.
In such a case, execute the OS installation program manually using the following
procedure.
1) Re-start up the machine.
2) After the start-up, press the [F5] key repeatedly on the keyboard and open the
BIOS boot menu window.
3) Using the (up/down arrow) ↑ or ↓ key on the keyboard to select the "USB CD"
item and press the [Enter] key.
4) The confirmation message will appear. Press the [Enter] key again to execute
the program.
(2) When the OS recovery operation is completed, the following messages (Command
Prompt) are displayed on the monitor screen,
"Install Completed!!"
"Press Any Key To Continue..."
When the [Enter] key is pressed the program is restarted. Therefore, take out the
"OS Recovery CD-ROM" from the drive before the restart.
(3) After the start-up, OS (WindowsXPe) is started up and OS initialization is started.
After some while (about 5 minutes), the following dialog appears on the monitor
screen. Click the [OK] button (press the [Enter] key) to re-start up the OS.
FBReseal
Machine Resealed! Click OK to reboot!
(4) The Login window appears. Perform the login operation using the following account
name and password.
Account Name
Password ：autologon
Service Information
OK
：equipment
When the focus is moved from
"Account" to "Password", press the
Tab key (because there is no mouse).
SI1705004E-00=SIGMA-G5SII Service Manual
226/273
For Service Engineer
- Quick Links:
- Installation
- Machine Specifications
Hide quick links:
Advertisement
Table of Contents
