Logging In To The Firewall And Configuring Basic Settings; Logging In To The Firewall Through The Console Port; Connecting The Firewall To A Configuration Terminal Through A Console Cable - HP A-F1000-E Installation Manual

Vpn firewall

Hide thumbs Also See for A-F1000-E:

Table of Contents

Logging in to the firewall and configuring basic

settings

This chapter includes these sections:

•

Logging in to the firewall through Telnet

•

Powering on the firewall

•

Logging to the firewall through a web browser

•

Performing basic settings for the firewall

•

This chapter describes only the commonly used methods for logging in to the firewall. For more firewall

Logging in to the firewall through the console port

Connecting the firewall to a configuration terminal through a

console cable

Follow these steps to connect a configuration terminal to the firewall by using the console cable:

Select a configuration terminal, which can be a character terminal with an RS232 serial port, or a PC.

Step1

Plug the DB-9 female connector to the serial port of the configuration terminal or PC.

Step2

Connect the RJ-45 connector to the console port of the firewall.

Step3

Table of Contents