Installing A Cf Card - HP A-F1000-E Installation Manual

Vpn firewall

Hide thumbs Also See for A-F1000-E:

Table of Contents

Figure 11 Install an interface module

Use a screwdriver to fasten the captive screws on the interface module.

Step3

After the firewall is powered on, check the status LED on the front panel. On means the interface module

Step4

is installed correctly and running properly. Off means the interface module has failed the power-on

self-test (POST).

NOTE:

Keep the removed filler panel and screws for future use.

Installing a CF card

Follow these steps to install a CF card:

Push the CF card eject button all the way into the slot, and make sure that the button does not project from

Step1

the panel.

Insert the CF card into the slot following the direction shown in

Step2

project from the slot.

Figure 12 Insert the CF card into the slot

Figure

12, and make sure it does not

Table of Contents