Table of Contents
Advertisement
6/63
Bosch Rexroth AG
System Presentation
1.2
Permitted Devices
1.3
Software
1.4
Further Documentation
1.5
Steps for Commissioning
The following permitted devices can be connected to the VAU 01.1U:
●
Control cabinet PC Rexroth IndraControl VPB 40.3
●
Panel PC Rexroth IndraControl VPP 16.3/40.3/60.3
●
Control cabinet PC Rexroth IndraControl VSB 40.3
●
Panel PC Rexroth IndraControl VSP 16.3/40.3/60.3
The communication between VAU 01.1U and connected control cabinet PC
is realized via the USB interface (XUSB In). Therefore, the UPS software has
to be installed on the connected device. The installation is described in the
relevant documentation of the control cabinet PC or of the panel PC, see also
chapter 1.4 "Further Documentation" on page
Documentation
Order code of the documenta‐
tion
Rexroth IndraControl
DOK-SUPPL*-VPB*40.3***-
VPB 40.3
PRxx-EN-P
Rexroth IndraControl
DOK-SUPPL*-VPP*XX.3***-
VPP 16.3/40.3/60.3
PRxx-EN-P
Rexroth IndraControl
DOK-SUPPL*-VSB*40.3***-
VSB 40.3
PRxx-EN-P
Rexroth IndraControl
DOK-SUPPL*-VSP*XX.3***-
VSP 16.3/40.3
PRxx-EN-P
Fig.1-2:
Further documentation for devices which are permitted for the VAU
01.1U
Befor using the UPS, ensure that
●
the device to be connected is permitted for the VAU 01.1U,
●
the required software (UPS NT Control) is installed,
●
the switch positions are correct,
●
the correct order for mounting, connection and cabling is kept.
DOK-SUPPL*-VAU*01.1U**-PR03-EN-P
Rexroth IndraControl VAU 01.1U UPS with USB interface
6.
Parts number
R911323876
R911323511
R911323880
R911323882
Advertisement
Table of Contents
