Table of Contents
Advertisement
DOK-SUPPL*-VAU*01.1U**-PR03-EN-P
Rexroth IndraControl VAU 01.1U UPS with USB interface
Fixing the cables
5.3.3
Dismounting
Unlocking the UPS
Removing the UPS from the
mounting rail
CAUTION
Fasten the VAU 01.1U on a stable mounting rail. A mounting rail which is not
stable enough can deform during transport, and therefore the VAU 01.1U can
get loose.
Unfixed cables are not permitted. An appropriate fixing (e. g. installation in a
cable channel) and a strain relief of the cables is required.
Before dismounting the VAU 01.1U, ensure that
●
the PC is shutdown,
●
the VAU 01.1U has been disconnected from the voltage supply,
●
the cables of the VAU 01.1U have been removed.
●
Unlock the VAU 01.1U from the mounting rail by pulling the release lev‐
er to the bottom side by using a screwdriver, see
release lever of the mounting rail holder" on page
①
Release lever
Fig.5-4:
Position of the release lever of the mounting rail holder
●
Pull off the VAU 01.1U from the mounting rail.
●
Finally, remove the VAU 01.1U in upwards direction.
Bosch Rexroth AG
Dimensions, Mounting and Dismounting
Possible personal injury and material damage
due to a VAU 01.1U that loosens from the
mounting rail caused by insufficient fastening.
1
27/63
fig. 5-4 "Position of the
27.
Advertisement
Table of Contents
