Table of Contents
Advertisement
*) Also lubricate the sides of
the fl at-top chain belt.
10.4.4
Replacing the chain
Conveyor chain failure
Deformations such as bending and/or twisting of the chain, e.g., by tilting the chain
reel during installation, can result in chain failure and even crashing. There is a risk
of damage to property.
Make sure the chain remains straight and can leave the chain reel smoothly
during installation.
Make sure the chain reel cannot tilt during installation.
If the chain reel does tilt during installation and the chain is deformed: Use the
removal tool to remove the affected area, with a generous margin on either end.
Travel direction of conveyor chain
Make sure the direction of the travel of the conveyor chain is the same as the main
direction of transport.
Fig. 32:
Travel direction of chain
Conveyor chain failure
Inadequate lubrication of the conveyor chain can result in conveyor chain failure or
even crashing. There is a risk of damage to property.
The conveyor chain used in this product comes lubricated.
Lubricate the conveyor chain before initial commissioning with Structovis GHD
(0 842 904 229), using 1–2 g oil/m of chain, then every 1,000 hrs with
2–3 g oil/m of chain.
Fig. 33:
Lubricating points
3 842 358 792/2016-12, Material and information fl ow technology: HQ 2/C-H, HQ 4, Bosch Rexroth AG
Maintenance and repair
NOTE
NOTE
NOTE
)
*
51/64
)
*
Advertisement
Table of Contents
