Please note:
• Connect the pneumatics
at X and Y. This charges
the system more quickly
and evenly.
• The pneumatic hoses on
all 4 ports must be the
same length.
Connect the lift
transverse unit to the
compressed air supply.
7.6.11
Connecting the product to the pneumatic system
High pneumatic pressure is present!
Risk of serious injury or death.
Switch off the compressed air supply to the relevant system component before
installing, removing or connecting the product to the pneumatic system.
Secure the system against unintended reactivation.
• For specifi cations on compressed air and operating pressure, see page 58.
X
Fig. 18:
Pneumatic connection (HQ 2/C-H shown)
3 842 358 792/2016-12, Material and information fl ow technology: HQ 2/C-H, HQ 4, Bosch Rexroth AG
WARNING
Assembly
33/64
Y
551 261-18