Table of Contents
Advertisement
14/64
About this product
Please note:
The main direction of
transport of the lift
transverse unit is always
the same as the direction
of rotation of the motor.
Exception:
HQ 4
b
x b
= 443 x 443 mm
T
L
With these values, the
unloading HQ must be
rotated by 180° when
installed in order to
transport the WT
(see Fig. 4). This is the
only way to ensure secure
transport without the
WT getting stuck.
1
) The customer must switch to
motor mounting M on left
(see Section 7.5 "Conversion
to motor mounting M left
(by customer)" on page 19).
2
) Lateral guide mounted as a
lateral guide.
3
) Lateral guide mounted as a
non-damped stop instead of
a damper (only sensible with
unloaded WTs).
Bosch Rexroth AG, Material and information fl ow technology: HQ 2/C-H, HQ 4, 3 842 358 792/2016-12
Table 6: Direction of transport and damper position for WT 4, WT 4/F, WT 2/H, WT 2/F-H
Motor mounting M (standard)
S
!
SW13
M
=25 Nm
D
Fig. 3:
Lateral guide mounted as lateral guide (S) or non-damped stop (A)
A
!
!
M
Motor mounting M on left
-
!
SW13
=25 Nm
D
1
)
Advertisement
Table of Contents
