Adjusting the Switch Box Fore/Aft Position
If switch box fore/aft adjustment bolts (10) are loosened, the
fore/aft position of switch box (1) can be adjusted through a
range of 20 mm.
To loosen bolts (10), remove their caps. After adjusting the
position, tighten bolts (10) again. After tightening them, put
their caps back on.
Wrench Size: 17 mm
Tightening Torque: 50 N·m (5 kgf·m)
Adjusting the Vertical Height of the Left Console
Remove bolt (11) A and loosen bolt (11) B. The vertical height
can be adjusted by selecting from 3 positions (15 mm pitch,
adjustment range of 30 mm). When loosening bolts (11) A and
B, remove their caps. After adjusting the position, tighten bolts
(11) A and B again. After tightening them, put their caps back
on.
Wrench Size: 17 mm
Tightening Torque: 50 N·m (5 kgf·m)
Left Armrest Angle Adjustment
The armrest can be adjusted in a range of 30° vertically by
turning armrest angle adjustment dial (12).
Switch Box Angle Adjustment
If 2 bolts (13) are loosened, the switch box angle can be
adjusted in a range of 15° upwards and 5° downwards, relative
to one bolt. After adjusting the position, tighten the bolts (13)
again.
Wrench Size: 13 mm
Tightening Torque: 20 N·m (2 kgf·m)
OTHER ATTACHMENTS
Joystick Steering
13-6
11 A
11 B
10
12
1
MNEK-13-004
13
MNEK-13-004
15°
5°
13
85MNEK-13-08