Table of Contents
Advertisement
IMPORTANT: Do not overtighten the filter.
7. Install the filter in reverse order and tighten the filter
until the gasket contacts filter head surface.
Then tighten it by hand an additional three-fourths
to one turn.
f
NOTE: Refer to the instructions supplied with the filter.
f
NOTE: Install the element with care so that the O-ring is
not damaged from twisting. Check for any oil leakage at
the filter mounting area.
8. Supply the specified amount of engine oil by running
the engine at low idle for 5 minutes. (Refer to the
descriptions for 2 Change Engine Oil.)
d
CAUTION: If no oil pressure is noted within 15
seconds after the engine is started, shut down the
engine to reduce the possibility of internal engine
damage.
MAINTENANCE
7-29
Advertisement
Table of Contents
Troubleshooting
