Table of Contents
Advertisement
11. Using a filter wrench, turn cartridge filter (6)
counterclockwise to remove it. Properly dispose of
the oil and filter.
12. Clean the filter-seating surface. After coating the new
cartridge filter gasket surface with new oil, lightly
turn the cartridge filter clockwise by hand until the
cartridge filter sealing surface comes in contact with
the filter-seating surface.
13. At this time, tighten the cartridge filter an additional
3/4 turn with a filter wrench. Take care not to tighten
the filter cartridge excessively. Be careful not to
damage filter cartridge by overtightening.
m : 25±5 N·m (2.5±0.5 kgf·m) (18.5±3.7 lbf·ft)
14. Refill the specified amount of oil through
transmission oil filler port (7).
Oil amount: 40 liters (10.5 gallons)
15. Start the engine and keep it running for two minutes.
16. Check that the oil level is within the specified range
in oil level gauge (8). Refill as necessary.
f
NOTE: Replace both two filters (6). Never reuse cartridge
type element.
Install the cartridge with care so that the O-ring is not
damaged due to twisting.
Check for any oil leakage at the drain plug and the filter
mounting area.
MAINTENANCE
7-36
90Z7-7-32
Advertisement
Table of Contents
Troubleshooting
