Table of Contents
Advertisement
Replace Engine Oil Filter
--- every 500 hours (each time when engine oil is
changed)
d
WARNING: Immediately after the machine has
been operated, all engine parts are hot. Wait for
the engine to cool before starting any maintenance
work. Failure to do so may cause severe burns.
1. Park the machine following the same procedures as
described on page 7-7 for preparation of inspection/
maintenance work.
2. Clean the areas around the oil filter.
3. Remove the oil filter and properly dispose of it.
Make sure the O-ring is removed with the filter.
IMPORTANT:
Take care not to allow foreign matter such as dirt
to enter the oil filter.
Be careful not to damage the filter body when
removing or installing the filter.
4. Clean the oil filter head gasket surface.
5. Fill the new filter with clean engine oil.
6. Apply a light film of clean engine oil to the gasket
surface of the new filter cartridge.
f
NOTE: Refer to p. 7-16 for the engine oil.
MAINTENANCE
7-28
1
90Z7B-7-32-1
90Z7B-7-30-1
Advertisement
Table of Contents
Troubleshooting
