Siemens SINUMERIK 840D sl Programming Manual page 91
Measuring cycles
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Parameter
Adapt tool length
(only for "Length" calibration)
Calibration groove data set
DFA
TSA
Note
When the calibration is performed for the first time, the default setting in the data field of the
probe is still "0". For this reason, the TSA parameter must be programmed > probe ball radius
to avoid the alarm "Safe area exceeded".
List of the result parameters
The measuring variant "Calibrate in groove" provides the following result parameters:
Table 3-5
Parameters
_OVR [4]
_OVR [5]
_OVR [8]
_OVR [10]
_OVR [12]
_OVR [14]
_OVR [9]
_OVR [11]
_OVR [13]
_OVR [15]
_OVR [20]
_OVR [21]
_OVR [27]
_OVR [28]
_OVI [2]
_OVI [5]
_OVI [9]
Measuring cycles
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
Description
● No (adapt trigger point only)
● Yes (adapt probe length and trigger point)
● 1
● 2
● 3
Measurement path
Safe area for the measurement result
"Calibrate in groove" result parameters
Description
Actual value probe ball diameter
Difference probe ball diameter
Trigger point in minus direction, actual value of 1st axis of the plane
Trigger point in plus direction, actual value of 1st axis of the plane
Trigger point in minus direction, actual value of 2nd axis of the plane mm
Trigger point in plus direction, actual value of 2nd axis of the plane
Trigger point in minus direction, difference of 1st axis of the plane
Trigger point in plus direction, difference of 1st axis of the plane
Trigger point in minus direction, difference of 2nd axis of the plane
Trigger point in plus direction, difference of 2nd axis of the plane
Positional deviation of the 1st axis of the plane (probe skew)
Positional deviation of the 2nd axis of the plane (probe skew)
Work offset range
Safe area
Measuring cycle number
Probe number
Alarm number
Measuring variants
3.2 Measure workpiece (turning)
Unit
-
-
mm
mm
Unit
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
-
-
-
91
Hide quick links:
Advertisement
Table of Contents
