Siemens SINUMERIK 840D sl Programming Manual page 143
Measuring cycles
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Position after the end of the measuring cycle
Without activated protection zone, the probe ball is at the measuring height in the center of
the groove. With protection zone, the probe ball is centered with respect to the groove over
the protection zone at the starting position of the measuring cycles.
Procedure
The part program or ShopMill program to be processed has been created and you are in the
editor.
Parameter
G code program
Parameter
Description
Measuring
● Standard measuring
method
method
● 3D probe with spindle
reversal
● Align 3D probe
PL
Measuring plane (G17 - G19) -
Calibration data set (1 - 40)
(only for measuring without
spindle reversal)
Measuring cycles
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
1. Press the "Meas. workpiece" softkey.
2. Press the "Edge distance" softkey.
3. Press the "Groove" softkey.
The input window "Measure: Groove" opens.
Unit
-
1)
2)
-
3.3 Measure workpiece (milling)
ShopMill program
Parameter
Description
T
Name of the probe
D
Cutting edge number (1 - 9)
Measuring
● Standard measuring
method
method
● 3D probe with spindle
reversal
● Align 3D probe
Calibration data set (1 - 40)
(only for measuring without
spindle reversal)
X
Start point X of the measure‐
ment
Y
Start point Y of the measure‐
ment
Z
Start point Z of the measure‐
ment
Measuring variants
Unit
-
-
-
1)
2)
-
mm
mm
mm
143
Hide quick links:
Advertisement
Table of Contents
