Table of Contents
Advertisement
Command
SCH :
Command format
SLF :
Command format
SPD :
Command format
SPO :
Command format
TIM :
Command format
TRG :
Command format
TRM :
Command format
12-8
Search
SCH : <1><2>...<N>/[ ]
ID number search
<1> : 0
<2><3><4>: 001 to 999 or 000
Real-time clock search
<1> : 1
<2><3>...<13>: YYMMDDhhmmss
Address search
<1> : 2
<2><3>...<7>: hhmmss
Start ID search
<1> : 3
<2> : 0 = Forward, 1 = Backward
BOD/EOD search
<1> : 4
<2> : 0 = EOD, 1 = BOD
Ex.) SCH:0100
SCH:1970506120000 — Target: 1997, May 6, 12:00:00
Related command: SCH?
Self-check
SLF : <1>/[ ]
<1>: 0 = Self-check stop, 1 = Self-check start
Related command: SLF?
Tape speed setting
SPD : <1>
<1>: 0 = 1 × (normal speed), 1 = 1/2 ×, 2 = 1/4 ×, 3 = 1/8 ×, 4 = 1/16 ×, F = EXT
Related command: SPD?
Speaker source selection
SPO : <1>/[ ]
<1>: 0 = Voice channel, 1 = Monitor selected data channel
Related command: SPO?
Real-time clock setting
TIM : <1><2>...<12>
<1><2>: Year (last 2 digits)
<3><4><5><6>: Month and date
<7><8><9><10><11><12>: Hours, minutes and seconds
Related command: TIM?
Trigger mode setting
TRG : <1>
<1>: 0 = RSV
1 = Pre-trigger single mode (low: start)
3 = Normal single mode (low: start)
Related command: TRG?
Terminator selection
TRM : <1>
<1>: 0 = (CR + LF), 1 = CR, 2 = LF
This sets the break code for replies from the recorder. The default is (CR + LF).
Related command: TRM?
Contents
— Target: ID = 100
2 = Pre-trigger multi mode (low: start, high: stop)
4 = Normal multi mode (low: start, high: stop)
- Quick Links:
- Analog Channels
Hide quick links:
Advertisement
Chapters
Table of Contents
