Table of Contents
Advertisement
4 Preparations
4-1 Connecting the Power Supply
AC Power Supply
1
Set the AC voltage selector switch to 100/120 V or 220/240 V according to the voltage
to be used.
2
Connect the AC power cord (supplied) to the AC IN connector, and supply either AC
90 to 132 V (for 100/120 V setting) or AC 198 to 250 V (for 220/240 V setting ) to the
recorder.
EXT. CONT
REMOTE
AUX-2 (IRIG-B)
IN
OUT
D4
D3
!
WARNING
• When the AC voltage selector switch is set to AC 100/120 V, supplying AC 198 to 250 V
may damage the recorder's internal circuitry.
• When the AC voltage selector switch is set to AC 220/240 V, the recorder will not
operate when supplied with AC 90 to 132 V.
• The AC power cord has a safety earth. Be sure to connect the power cord to an earthed
socket.
• When using a plug adapter (3-pin to 2-pin) for the AC power cord, be sure to connect
the green wire to earth.
!
CAUTION
• Make sure that spike noise is not included when taking AC power from an invertor, etc.
• When the recorder is connected to an AC power source and the battery pack mounted
on the battery pack mount on the left side of the recorder is charging, the charging
function operates and the ventilation fans on the right side rotates even when the
STAND BY switch on the rear panel is set to OFF. Once charging is completed the
ventilation fans stop rotating automatically.
8 7 6 5 4 3 2 1
% / dB
RAL / HLD
MST / SLV
9.6 / 19.2
COM
SYNC
IRIG ON / OFF
TRG S/M
APD OFF / ON
PTRG OFF/ON
(UP / DOWN)
AUX-1 (DIGITAL)
TRIG/REC
DC IN
IN
OUT
IN
XLR 32F
CANNON
OPTION SLOT 2
LSB DIGITAL
OUTPUT
D2
D1
8
7
6
AC FUSE
VOLTAGE
!
!
SELECTOR
T4A
220V
240V
STAND BY
AC IN
DC BREAKER
OPTION SLOT 1
ANALOG
OUTPUT
5
4
3
2
1
4-1
- Quick Links:
- Analog Channels
Hide quick links:
Advertisement
Chapters
Table of Contents
