Table of Contents
Advertisement
Command
RPT?
Command format
Returned format
SCH?
Command format
Returned format
SLF?
Command format
Returned format
SPD?
Command format
Returned format
SPO?
Command format
Returned format
Auto repeat status read
RPT? /[ ]
RPT:<1>
<1>: 0 = Other than below
1 = Auto repeat - recording
2 = Auto repeat - rewinding
Related command: RPT
Search status
SCH? /[ ]
SCH:<1>
<1>: 0 = Other than below (after power-on STOP command execution)
1 = Search underway
2 = Search finished (FOUND)
3 = Search finished (NOT FOUND)
Related command: SCH
Self-check status
SLF? /[ ]
SLF:<1>
<1>: 0 = Other than below (after power-on STOP command execution)
1 = Self-check underway
2 = Self-check finished (OK)
3 = Self-check finished (NG)
Related command: SLF
Related command: ERR?
Tape speed read
SPD? <1>/[ ]
<1>: 0 = Recorder setting value, 1 = Tape data
SPD:<1>
<1>: 0 = 1 ×, 1 = 1/2 ×, 2 = 1/4 ×, 3 = 1/8 ×, 4 = 1/16 ×, F = EXT
Related command: SPD
Speaker source selection status
SPO? /[ ]
SPO:<1>
<1>: 0 = Voice channel, 1 = Monitor selected data channel
Related command: SPO
Contents
12-17
- Quick Links:
- Analog Channels
Hide quick links:
Advertisement
Chapters
Table of Contents
