Siemens SINUMERIK 840D sl Turning Operating Manual page 536
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Programming technology functions (cycles)
10.4 Milling
Procedure
Parameters in the "Input complete" mode
Parameters, G code program
Input
PL
Machining plane
Milling direction
RP
Retraction plane
SC
Safety clearance
F
Feedrate
Parameter
Description
Machining
● Face C
surface
● Face Y
● Peripheral surface C
● Peripheral surface Y
(only for Shop‐
Turn)
Position
● At the front (face)
● At the rear (face)
● Outside (peripheral surface)
(only for Shop‐
● Inside (peripheral surface)
Turn)
Clamp/release spindle (only for end face Y/peripheral surface Y)
The function must be set up by the machine manufacturer.
(only for Shop‐
Turn)
536
1.
The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2.
Press the "Milling" softkey.
3.
Press the "Groove" and "Circumferential groove" softkeys.
The "Circumferential Groove" input window opens.
● Complete
mm
mm
*
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant cutting
rate
Operating Manual, 06/2019, A5E44903486B AB
mm/min
mm/tooth
rpm
m/min
Unit
Turning
Advertisement
Table of Contents
