Siemens SINUMERIK 840D sl Turning Operating Manual page 398
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Programming technology functions (cycles)
10.1 Drilling
Parameter
Description
Axes
Selection of the participating axes:
● XY (1st and 2nd axis of the plane)
(only for G code)
● ZC (rotary axis and assigned linear axis)
Note:
Rotary axes are only displayed in the selection field if they have been released for use in
the position pattern.
Please observe the information provided by your machine manufacturer.
Axes XY (at right angles)
X0
X coordinate of the reference point (abs)
Y0
Y coordinate of the reference point (abs)
α0
Starting angle for first position referred to the X axis.
Positive angle: Circle is rotated counter-clockwise.
Negative angle: Circle is rotated clockwise.
R
Radius
N
Number of positions
Positioning
● Straight line: Next position is approached linearly in rapid traverse.
(only for G code)
● Circular: Next position is approached along a circular path at the feedrate defined in
the machine data.
Axes ZC (G19)
Z0
Z coordinate of the reference point (abs)
C0
Start angle of the C axis (abs)
N
Number of positions
(only for G code)
Machining
● Face C
surface
● Face Y
(only for Shop‐
● Peripheral surface C
Turn)
● Peripheral surface Y
Position
● At the front (face)
(only for Shop‐
● At the rear (face)
Turn)
● Outside (peripheral surface)
● Inside (peripheral surface)
Selection options for the following positions - (only for face C/Y)
Position
● center
(only for Shop‐
● off-center
Turn)
398
Operating Manual, 06/2019, A5E44903486B AB
Unit
mm
mm
Degrees
mm
mm
Degrees
Turning
Advertisement
Table of Contents
