Siemens SINUMERIK 840D sl Turning Operating Manual page 419
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Procedure for longitudinal thread, tapered thread, or face thread
Parameter "Longitudinal thread" in the "Input complete" mode
G code program parameters
Input
PL
Machining plane
Parameter
Table
Selection - (not for table
"Without")
P
Turning
Operating Manual, 06/2019, A5E44903486B AB
1.
The part program or ShopTurn program to be processed has been cre‐
ated and you are in the editor.
2.
Press the "Turning" softkey.
3.
Press the "Thread" softkey.
The "Thread" input window opens.
4.
Press the "Longitudinal thread" softkey.
The "Longitudinal Thread" input window opens.
- OR -
Press the "Tapered thread" softkey.
The "Tapered Thread" input window opens.
- OR -
Press the "Face thread" softkey.
The "Face Thread" input window opens.
● Complete
Description
Thread table selection:
● Without
● ISO metric
● Whitworth BSW
● Whitworth BSP
● UNC
Data, table value, e.g. M10, M12, M14, ...
Select the thread pitch/turns for table "Without" or specify the thread pitch/turns
corresponding to the selection in the thread table:
● Thread pitch in mm/revolution
● Thread pitch in inch/revolution
● Thread turns per inch
● Thread pitch in MODULUS
Programming technology functions (cycles)
ShopTurn program parameters
T
Tool name
D
Cutting edge number
S / V
Spindle speed or constant cutting
rate
10.2 Rotate
rpm
m/min
Unit
mm/rev
in/rev
turns/"
MODULUS
419
Advertisement
Table of Contents
