9.5.4
Skip part-program blocks
Function
When testing or breaking in new programs, it is useful to be able to disable or skip certain part
program blocks during program execution. For this, the respective records must be marked
with a slash.
Figure 9-1
Selection
This function is selected via the operator interface in the "Program control" menu.
The selection sets the following interface signal:
DB21, ... DBX26.0 (skip block selected)
This does not activate the function.
Activation
The function is activated via the interface signal:
DB21, ... DBX2.0 (activate skip block)
Note
The "Skip part programs" function remains active during block searches.
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Main program/subroutine
%100
N10 ...
N20 ...
Block being
N30 ...
processed
/N40 ...
/N50 ...
N60 ...
N70 ...
N80 ...
N90 ...
N100 ...
N110 ...
N120 M30
Skipping part program blocks
K1: Mode group, channel, program operation, reset response
Skip blocks
N40 and N50 during
processing
9.5 Program test
477