7.4.6.7
Example: Intermediate gear with encoder on the tool
Figure 7-9
The ratio of the internal increments to the encoder increments per degree is calculated as
follows:
7.5
Closed-loop control
7.5.1
General
Position control of an axis/spindle
The closed-loop control of an axis consists of the current and speed control loop of the drive
plus a higher-level position control loop in the NC.
The basic structure of an axis/spindle position control is illustrated below:
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
G2: Velocities, setpoint / actual value systems, closed-loop control
Intermediate gear with encoder directly on the rotating tool
7.5 Closed-loop control
357