Miele CS 1421 Operating And Installation Instructions page 8

Salamander

Hide thumbs Also See for CS 1421:

Table of Contents

Warning and Safety instructions



While the salamander is under guarantee, repairs should only be

undertaken by a Miele authorised service technician. Otherwise the

guarantee is invalidated.



Miele can only guarantee the safety of the appliance when genu-

ine original Miele replacement parts are used. Faulty components

must only be replaced by Miele spare parts.



The salamander is not intended for use with an external timer

switch or a remote control system.



If the plug is removed from the connection cable or if the cable is

supplied without a plug, the salamander must be connected to the

electrical supply by a suitably qualified electrician.



If the connection cable is damaged, it must be replaced by a suit-

ably qualified electrician with a special connection cable of type H

05 VV-F (pvc insulated). See "Electrical connection".



During installation, maintenance and repair work, the salamander

must be completely disconnected from the mains electricity supply.

Depending on country this is done in one of several different ways:

– disconnect the mains fuse, or

– completely unscrew the screw-out fuse (in countries where this is

applicable), or

– switch off at the wall socket and withdraw the plug from the

socket. Pull by the plug and not by the mains connection cable to

disconnect from the mains electricity supply.



Danger of electric shock.

Do not use the salamander if it is faulty. Switch it off immediately,

disconnect it from the mains electricity supply and contact Miele.

Table of Contents