Cleaning And Care - Miele CS 1421 Operating And Installation Instructions
Salamander
Hide thumbs
Also See for CS 1421:
- Operating and installation instructions (32 pages) ,
- Operating and installation instructions (36 pages)
Table of Contents
Advertisement
Cleaning and care
Danger of burning.
Before cleaning the salamander
make sure that you have switched it
off and that it has cooled down.
Danger of injury.
The steam from a steam cleaning ap-
pliance could reach electrical com-
ponents and cause a short circuit.
Do not use a steam cleaner to clean
the salamander.
The use of unsuitable cleaning
agents can cause the surfaces to
discolour or alter.
All surfaces are susceptible to
scratching.
Remove any residual cleaning agent
immediately.
20
Allow the CombiSet to cool down
before cleaning.
The CombiSet and accessories
should be cleaned after each use.
Dry the CombiSet after using water to
clean it. This helps prevent limescale
deposits.
Unsuitable cleaning agents
To avoid damaging the surfaces, do not
use:
– cleaning agents containing soda, am-
monia, acids or chlorides
– cleaning agents containing descaling
agents
– stain or rust removers
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
– solvent-based cleaning agents
– dishwasher cleaner
– grill and oven cleaners
– glass cleaning agents
– hard, abrasive brushes or sponges,
e.g. pot scourers, brushes or
sponges which have been previously
used with abrasive cleaning agents
– melamine eraser blocks
Advertisement
Table of Contents
