Table of Contents
Advertisement
Selecting Feature Data to Measure
Select feature quantity data to measure on a detected object. Setting unnecessary items to "No" decreases the
inspection time.
Selectable feature data types are Perimeter, Projection Width/Height and Principal Axis Angle.
1.
Select "Search Method".
2.
Set whether or not to detect Perimeter,
Projection Width/Height and Principal Axis
Angle.
Yes (default): Measures the selected item.
No: Does not measure the selected item.
When setting labeling to "No", Perimeter and Projection Width/Height cannot be detected.
When setting Principal Axis Angle to "No", Projection Width/Height cannot be detected.
Changing Other Search Methods
(Labeling/Boundary/Fill Holes)
1.
Select "Search Method".
2.
Change the setting of Labeling, Boundary, or Fill Holes as necessary.
Extracting Each Data of Multiple Objects (Labeling)
This is a function to detect each Feature data when multiple objects exist within the area.
Yes (default):
Measures feature quantity of each object.
No:
Feature quantity of each object is not measured and only total area, coordinate of the
gravity center, and principal axis angle are output.
Decides Whether or not to Detect an Object on the Boundary
of an Area (Boundary)
Yes (default):
Detects an object on the area frame.
No:
Ignores an object on the area frame.
You can set Boundary to "Yes" only when Labeling is set to "Yes".
Selecting Whether or not to Fill inside an Object with the
Target Color (Fill Holes)
If there is a part with different color from the
target color inside an object, measurement
of coordinate of gravity center or principal
axis angle is interfered. To prevent this,
processes to fill inside the object with the
target color.
Fill Holes is available when Labeling is set to "Yes".
118
Yes (default):
Executes Fill Holes.
No:
Does not execute Fill Holes.
- Quick Links:
- Pv500
Hide quick links:
Advertisement
Table of Contents
