Backing Up System Equipment Settings - Hitachi Compute Blade 2000 User Manual

Hide thumbs Also See for Compute Blade 2000:

Table of Contents

Backing up system equipment settings

System equipment stores various system settings and user settings. To avoid losing

your settings in case of a failure, Hitachi Data Systems recommends that you back

up the settings to the auxiliary storage, such as Network Attached Storage (NAS)

and so on) using the backup command when you change the settings.

Concerning back up, perform the following:

Back up the SVP configuration on the management module

Back up the settings according to "Backing up the Management Module

Settings" in Chapter 6".

Back up the setup data of the host bus adapter (HBA) basic input/output system

Back up the settings according to the procedure in the Hitachi Gigabit Fibre

Channel Board User's Guide (Utility Software Edition).

Back up the BIOS settings of the server blade

Write down the changed BIOS settings.

Back up the settings of the local area network (LAN) switch module

Back up the settings according to the procedure in the manual that came

with the LAN switch.

Back up the RAID settings

Write down the changed settings.

Back up the settings of the Fibre-channel switch module

Back up the settings according to the procedure in the user's guide in the CD

Hitachi Compute Blade 2000 Fibre Channel Switch Accessory CD (EN) that

came with the Fibre-channel switch module.

Table of Contents