Megaraid Sas 2108 - Hitachi Compute Blade 2000 User Manual

Hide thumbs Also See for Compute Blade 2000:

Table of Contents

MegaRAID SAS 2108

 Checking a disk array controller firmware version

Check the firmware version of a disk array controller before operating MegaRAID

Some of the screens and content of MegaRAID Web BIOS

may depend on the disk array controller firmware version.

Check your disk array controller firmware version with the

following procedure, and see contents for the firmware

Turn on the power supply to the system equipment.

When the following screen appears, press and hold the Ctrl key on the lower

left of the keyboard and press the H key.

The MegaRAID WebBIOS is started.

LSI MegaRAID SAS-MFI BIOS

Version xx.xx.xx (Build xxxxxx xx, 20xx)

HA -x (Bus xx Dev xx) MegaRAID SAS xxxxxxxxx

FW package: xx.xx.xx.-xxxx

x Virtual Drive(s) found on the host adapter.

x Virtual Drive(s) handled by BIOS

Press <Ctrl><H> for WebBIOS

If the operating system was been started before you press the keys, shutdown

the operating system and then restart the system equipment. Check the

manual for ending your operating system because some operating systems,

such as Windows, require shutdown and other special operations for

termination.

The following screen is displayed.

Table of Contents