Table of Contents
Advertisement
DRX-2
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
72
Number
Description
121500
Videoloop test succeeded.
121501
Wrong user input.
121502
The Chrysalis SYNC-module cannot be initialized.
121503
The Chrysalis MIXER-module cannot be initialized.
121504
The Chrysalis VideoPostProcessor-module cannot be ini-
tialized.
121505
The Chrysalis DENC-module cannot be initialized.
121506
The VideoInputProcessor cannot be initialized.
121507
The VideoInputProcessor cannot detect a sync-signal.
121508
The Chrysalis VideoFrontEnd-module cannot be initialized.
121509
The Chrysalis VideoFrontEnd-module cannot capture a video
field.
121510
When selected the RGB video input:
Error in color red signal and/or
Error in color green signal and/or
Error in color blue signal.
When selected one of the other video inputs:
Error in luminance signal (Y) and/or
Error in chrominance signal (U) and/or
Error in chrominance signal (V).
DS:> 1215 cvbs ntsc
121500:
Test OK @
DS:> 1215 cvbs pal
121508: The VideoInputProcessor cannot detect a sync-signal.
Error @
DS:> 1215 yuv ntsc
121511:
Error in luminance signal(Y)
Error in chrominance signal(U)
Error in chrominance signal(V)
Error @
DS_SYS_SlashVersionSet
1217
Set the slash version of the system
-
Decode the user input for the slash version to set
-
Issue the command to set the slash version to the analog board
-
Wait for the result and return this to the user
Less than 1 second.
The slash version
Number
Description
121700
Setting the slash version succeeded
121701
Invalid slash version, no slash version is set.
121702
Setting the slash version on the Analog Board fails.
121703
Invalid input.
121704
The returned errorcode from the analog board is unknown:
121705
No DS errCode known for analog board error:
121706
There was no response from the analog board.
DS:> 1217 82
121700:
Test OK @
Advertisement
Table of Contents
