Table of Contents
Advertisement
DRX-2
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
42
DS_BE_WriteReadDvdR
907
Write data to and read data from a DVD+R disc through the DVDR Mechanism for verification
of the writing
-
Execute DS_BE_GetSelftestResults
-
Send the TRAY_IN command
-
Send the READ_TOC command
-
Use the OPC area to test if the DVD+R is (still) writable
-
Generate test data to write to the DVD+R
-
Transfer the test data to the disc location using DMA
-
Read back the data from disc using DMA
-
Compare the two data areas and check whether the areas are equal
Approximately 20 seconds
None
Number
Description
90700
The command executed successfully
90701
This nucleus cannot be executed because the Self-Test failed
90702
The BE cannot enter normal operating mode
90703
Unable to send the tray in
90704
Unable to read TOC from disc
90705
Invalid disc is loaded, please insert a DVD+RW disc
90706
Unable to write, the DVD+R disc is full
90707
No writable DVD+R sector found
90708
Writing the test pattern to DVD failed
90709
Reading back the test pattern from DVD failed
90710
Compare check failed
DS:> 907
090700: Testing on sector 0x36210: OK
Test OK @
DS_BE_StatisticalInformationGet
908
Retrieve the statistical information from the DVDR Mechanism
-
Send the GET_STATISTICAL_INFO command
-
Display the info returned from the BE
Less than 1 second
None
Number
Description
90800
The command executed successfully
90801
There was a time-out while communicating
90802
The DVDR Mechanism returned an unexpected result
90803
The BE returned an error code
90804
No acknowledge received from BE
90805
Communicating with the DVDR Mechanism failed
90806
The BE returned no info
DS:> 908
Number of times Tray went Open/Closed : 4
Total minutes the CD laser was on : 0
Total minutes the DVD laser was on : 0
Total minutes the write laser was on : 0
090800:
Test OK @
Advertisement
Table of Contents
