Table of Contents
Advertisement
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjustment
steps until the brake disc deflection is within
specification.
f. If the brake disc deflection cannot be brought
within specification, replace the brake disc.
LLLLLLLLLLLLLLLLLLLLLL
6. Install:
Front wheel
G
Refer to "FRONT WHEEL" on page 4-6.
EAS22260
REPLACING THE FRONT BRAKE PADS
NOTE:
When replacing the brake pads, it is not neces-
sary to disconnect the brake hose or disassem-
ble the brake caliper.
1. Remove:
Front brake caliper retaining bolts "1"
G
Brake caliper "2"
G
2. Remove:
Brake pad springs "1"
G
Brake pads "2"
G
Brake pad shims "3"
G
Brake pad spring "4"
G
3
3. Measure:
Brake pad wear limit "a"
G
Out of specification → Replace the brake
pads as a set.
Brake pad lining thickness (inner)
6.2 mm (0.24 in)
Limit
0.8 mm (0.03 in)
Brake pad lining thickness (outer)
6.2 mm (0.24 in)
Limit
0.8 mm (0.03 in)
4. Install:
Brake pad spring "1"
G
Brake pad springs "2"
G
Brake pad shims "3"
G
Brake pads "4"
G
NOTE:
Always install new brake pads and a new brake
pad spring as a set.
1
4-27
FRONT BRAKE
4
2
1
3
Advertisement
Chapters
Table of Contents
Troubleshooting
