Panasonic KX-TD816 Installation Manual page 491
Digital super hybrid system
Hide thumbs
Also See for KX-TD816:
- Programming manual (443 pages) ,
- Installation manual (395 pages) ,
- User manual (388 pages)
Table of Contents
Advertisement
990
Optional Programming
System Additional Information (contd.)
mea Field
Description
Selection
Default
References
02
(12) If Limited Call Duration is enabled in
0
:
both calls
0
Limited Call
program [502] "Extension-to-Outside Line
1 :
outgoing calls
Duration
Call Duration Limit", assigns if Limited
only
Call Duration is done for both outgoing and
incoming calls or for outgoing calls only.
(13) Allows you to remove confirmation tone 4.
0
:
disable
1
Confiiation
By default, a beep tone is emitted when a
1 :
enable
Tone
three-party conference is started / ended.
(14) Determines if the dialed " * " and "W' will be 0
:
no check
1
Toll Restriction
checked by Toll Restriction. This assignment
1 :
check
is required for certain central offices (CO) to
prevent toll fraud. Some COs ignore the
user-dialed " * " and "#?'. If your CO is such
a type, select "0" (no check).
(15) Unused
(16) Allows you to remove Confnmation Tone 3. 0
:
disable
1
Confirmation
This tone is sent when a conversation is
1
:
enable
Tone
established just after dialing the feature
number for accessing the following features:
Call Pickup, Paging, Paging Answer, Trunk
(Outside Line) Answer From Any Station
(TAFAS), Hold Retrieve and Call Park
Retrieve.
(17) An outside line set to pulse or call blocking
0
:
60 %
0
Dial Type
mode in program [402] "Dial Mode
1:
67 %
Selection
Selection" can have two settings. This
assigns the pulse break ratio during dial
pulsing. Select an appropriate ratio
depending on the standard in your country.
(18) Assigns if an extension's mailbox number
0
:
extension
0
Voice Mail
is substituted by the extension number or it
number
Integration
is programmable (free). If a call is
1 :
free
forwarded or rerouted to the Voice
Processing System (VPS), this system
automatically transmits the mailbox number
to the VPS to specify the user's mailbox.
To make it programmable, select "1
(free)", then assign the number in program
[609] "Voice Mail Access Codes".
- Quick Links:
- Installation Manual
Hide quick links:
Advertisement
Table of Contents
