System Programming And Diagnosis With Personal Computer - Panasonic KX-TD816 Installation Manual
Digital super hybrid system
Hide thumbs
Also See for KX-TD816:
- Programming manual (443 pages) ,
- Installation manual (395 pages) ,
- User manual (388 pages)
Table of Contents
Advertisement
3
Features
S
_
-2 ,
System Pro gramming and Diagnosis with Personal Computer
Description
This system can be programmed
and administered
using a personal
computer.
The EIA/Remote
Programming
& Diagnosis Manual
and its floppy is required to perform this feature. The KX-TD8 16
cannot perform the diagnosis.
There are two programming
methods:
Conditions
On-Site Programming
By Connecting a personal computer (PC) to your system, system
programming
and maintenance
can be performed locally. There
are two ways available to perform the above:
(Method 1.) Using the EIA (RS-232C) port
Connect the PC to the EIA (RS-232C) port provided.
The main
unit has an EIA (RS-232C) port which can be used for either
system administration
or SMDR.
*(Method 2.) Using a modem
Install the optional Remote Card. Connect the PC to an extension
jack. Assign the floating number of the modem in System
Programming.
Dial this number from the PC.
*Remote Programming
You can
perform system programming
and maintenance
from a
remote site using a PC. Install the Remote Card and assign the
floating number of the modem in System Programming.
Starting system administration
from a remote location can be done
in the following ways.
l
Call an extension (probably the Operator) from a remote
location and request a transfer to the modem.
l
Dial the floating number of the modem using the DISA
feature.
l
Assign the modem as the destination of the DIL 1: 1
feature.
For more information
and programming
instructions,
refer to the
EIA / Remote Programming
& Diagnosis Manual.
A proprietary telephone can be used to perform System Programming.
Only one access is allowed to System Programming at any one time.
To access system administration, a valid password-must be entered.
The password is factory-programmed and can be changed.
System administration can be performed on-line except for the
procedures of the diagnosis.
If the system goes off-line, the system functions as if it was in power
failure. (Refer to Power Failure Transfer feature.)
*: Available for KX-TD1232 only.
Features
3-l 15
- Quick Links:
- Installation Manual
Hide quick links:
Advertisement
Table of Contents
