Panasonic KX-TD816 Installation Manual page 327

Digital super hybrid system

Hide thumbs Also See for KX-TD816:

Table of Contents

CO Line Programming

Host PBX Access Codes

This program is only required if a host PBX or Centrex line is

connected to the system. Program [401] "CO Line Group Assignment"

is used to assign the line to a CO line group.

There is a maximum of four access codes per CO line group. Each

code has one or two digits. consisting of 0 through 9.

If conflicting access codes (such as 8 and 81) are stored for the same

CO line group, the l-digit code (8) only will be in effect.

When the programmed codes are dialed. Automatic Pause Insertion and

Toll Restriction are applied to the calls. The programmed pause time

(in program [412] "Pause Time") is automatically inserted after the

access code.

To assign all CO line groups to one selection, press the * key at step 3.

In this case, the display shows the contents programmed for CO line

Feature References

Section 3, Features,

External Feature Access

Host PBX Access

Pause Insertion, Automatic

System Programming

Show Quick Links

Table of Contents