Panasonic KX-TD816 Installation Manual page 319
Digital super hybrid system
Hide thumbs
Also See for KX-TD816:
- Programming manual (443 pages) ,
- Installation manual (395 pages) ,
- User manual (388 pages)
Table of Contents
Advertisement
403
45
0
CO Line Programming
Pulse Speed Selection
Description
A CO line set for pulse or call blocking mode in program [402]
"Dial Mode Selection" can have two pulse rates, 10 pps (low) and
20 pps (high). This program sets the pulse speed for each CO line
set to pulse or call blocking mode.
Selection
l
CO line number:
KX-TD816;
01 through OS, * ( * =a11 CO lines)
KX-TD 1232; 01 through 24, * ( * =a11 CO lines)
l
10 pps / 20 pps
Default
All CO lines - 10 pps
Programming
1.
2.
3.
4.
5.
Press STORE.
6.
To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7.
8.
Enter 403.
Display: Pulse Speed
Press NEXT.
Display: CO Line NO?->
Enter a CO line number.
To enter
CO
line number 01,
you
can also press NEXT.
Display example: COO1:lOpps
Keep pressing SELECT until the desired selection is
displayed.
Repeat steps 4 through 6.
Press END.
Conditions
.
In the case of KX-TD 1232, COO 1 through CO12'are for the Master
System and CO13 through CO24 are for the Slave, if available.
l
To assign all CO lines to one selection, press the * key at step 3. In
this case, the display shows the contents programmed for Cool.
l
The pulse speed required is determined by the CO or PBX line.
l
Program [990] "System Additional Information, Field (17) and Field
(2 1)" are used to select a pulse break ratio and inter-digit pause, if
needed.
Feature References
Section 3, Features,
Dial Type Selection
4-82
System Programming
- Quick Links:
- Installation Manual
Hide quick links:
Advertisement
Table of Contents
