Call Hold; Call Park And Page - Samsung OfficeServ 7200 General Description Manual
Supports software version 4.60 or higher
Hide thumbs
Also See for OfficeServ 7200:
- Programming manual (409 pages) ,
- User instructions (368 pages) ,
- Technical manual (265 pages)
Table of Contents
Advertisement
Follow Me
This feature allows the user to forward all calls from another station to the user's station or change the for-
ward destination to the user's current location.
External
Stations can be programmed to forward all, forward busy, forward no answer, forward DND C.O. calls to an
external number via a central office trunk if allowed by class of service. Intercom calls may also be pro-
grammed to forward to an external number via a central office trunk.
To Voice Mail
Each station may be programmed to allow or deny the ability to forward intercom calls to voice mail. When
denied, valuable message time in the voice mail system can be saved.
Preset Destination
If desired this feature provides for a permanent (preset) forward no answer destination for each extension. It
can only be programmed by the system technician or system administrator. When any station does not have
FWD/NO-ANSWER set, the call will ring this preset destination if one is programmed.
Preset Forward Busy
This feature allows the Preset Forward No Answer setting to also work for Busy status. When PRESET BUSY is
turned on the calls will follow the preset for both busy and no answer conditions.
CALL HOLD
Exclusive
Outside calls can be placed on exclusive hold at any keyset by pressing HOLD twice during a call. Calls placed
on exclusive hold can only be retrieved at the keyset that placed the call on hold. Intercom calls are always
placed on exclusive hold. Exclusive hold for trunk calls can be denied in class of service.
System
Outside calls can be placed on system hold at any station. Users may dial the access code or press the HOLD
button. Calls on system hold may be retrieved at any station.
Remote
Outside calls can be placed on hold at a station other than the station placing the call on hold. This feature
allows calls to be answered at one keyset and placed on hold at another station. This allows time for the user
to proceed to that station or allows the party that the call was intended for to have that call placed at their
station. The call or trunk button will flash at the remote hold station. NOTE: Intercom calls cannot be remote
held.
CALL PARK AND PAGE
Each C.O. line has its own park zone. This simple method eliminates confusion and ensures that a park zone
is always available. Pressing the PAGE key parks the call automatically. There are no extra buttons to press and
there is no lost time looking for a free zone.
4.9
- Quick Links:
- Programming
- Auto Attendant
Hide quick links:
Advertisement
Table of Contents
