Sony Trimaster PVM-L2300 Operation Manual page 51
Lcd video monitor
Hide thumbs
Also See for Trimaster PVM-L2300:
- Operation manual (142 pages) ,
- Manual (20 pages) ,
- Product manual (18 pages)
Table of Contents
Advertisement
Menu
HD
SD
DVI/HDMI Computer
HDMI Auto
H Shift Offset
Channel Name
NTSC Setup Level
Component Level
Betacam Setup Level
Function and operation ([
Transmission matrix
ITU709: Matrix of ITU-R BT.709 standards
ITU601: Matrix of ITU-R BT.601 standards
SMPTE240M: Matrix of SMPTE-240M standards
Note
The internal fixed value applies to the transmission matrix of the RGB format.
Transmission gamma
2.2: Transmission gamma 2.2
xvYCC: Transmission gamma of IEC 61966-2-4 standards (xvYCC)
Notes
• When you select xvYCC, set Emulation (page 53) to PVM-L2300 Native in the Color Gamut
menu of the Display Setting menu to display the extended color gamut area.
• When the quantization range of the DVI/HDMI signal is Full, the internal fixed value of the
transmission gamma is applied.
Sets Matrix/Gamma of the HD signal.
You can select from [ITU-R BT.709], ITU-R BT.601, SMPTE 240M, xvYCC 709, xvYCC 601
or User1 to User5.
Sets Matrix/Gamma of the SD signal.
You can select from ITU-R BT.709, [ITU-R BT.601], SMPTE 240M, xvYCC 709, xvYCC 601
or User1 to User5.
Sets Matrix/Gamma of the DVI/HDMI Computer signal.
You can select from [ITU-R BT.709], ITU-R BT.601, SMPTE 240M, xvYCC 709, xvYCC 601
or User1 to User5.
Sets the manual or automatic setting for the transmission matrix/transmission gamma of the
HDMI signal.
Off: Select to use Matrix/Gamma set in the HD, SD or DVI/HDMI Computer menu.
[On]: Select to set Matrix/Gamma automatically according to the input signal.
Note
When HDMI Auto is set to On and the signal of which the format is RGB and transmission
gamma is xvYCC is input, transmission gamma is set to the value fixed inside the monitor.
Sets the horizontal picture position when the analog signal is input.
You can select when Format is set to Composite Auto, Composite NTSC, Composite PAL,
Composite PAL-M, Composite SECAM, YC Auto, YC NTSC, YC PAL, YC PAL-M, YC
SECAM, Component YPbPr or Component RGB.
Set to –100 to +100*. [000]
*When the setting value is out of range, the display of the setting value is changed but the
horizontal position of the picture is not changed.
To hide the characters on the monitor during adjustment
Set the CHAR OFF button of the controller to on. As the characters on the display are
hidden, it becomes easy to adjust the picture. To display the characters, set the CHAR OFF
button to off.
Sets a channel name.
When the item is selected, you can select a preset name, or enter a new one.
PROG: Program signal
EDIT: Signal from an editor
CAM: Camera signal
VTR: Signal from a VTR
PREV: Preview monitor
New Name: Enter a new name. (Up to 20 characters can be entered.)
Sets the NTSC setup level.
You can select when Format is set to Composite Auto, Composite NTSC, YC Auto or YC
NTSC.
You can select from 0% or 7.5%.
Sets the component level of the analog component 480/60i signal.
You can select when Format is set to Component YPbPr.
You can select from SMPTE/EBU-N10 or Betacam.
Sets the Betacam setup level when Component Level is set to Betacam.
You can select from 0% or 7.5%.
]: factory setting)
51
Input Configuration Menu
Advertisement
Table of Contents
