Sony Trimaster PVM-L2300 Operation Manual page 46
Lcd video monitor
Hide thumbs
Also See for Trimaster PVM-L2300:
- Operation manual (142 pages) ,
- Manual (20 pages) ,
- Product manual (18 pages)
Table of Contents
Advertisement
Menu
Probe
Contrast Hold
Copy From
Preset Value
Other Monitor
Monitor ID
Memory Stick
Restore Factory Data
46
Adjustment Menu
Function and operation ([
Selects the probe to be used for automatic adjustment of the color temperature.
[CA-210]: Select when Konica Minolta CA-210 is used.
PM 5639/06: Select when DK-Technologies PM 5639/06 is used.
Eye-One Pro: Select when X-Rite Eye-One Pro is used.
The cable to connect the probe and the monitor is required.
About the color temperature after automatic adjustment
The values of x and y displayed by the probe may be different from those set in Target Color
Temp because the x and y values of the probe is calibrated by the monitor.
Note
An external PC with USB connector and software for adjusting the color temperature are
required to use the Eye-One Pro. Before adjusting the color temperature automatically, start
the software for adjusting the color temperature.
For the software for adjusting the color temperature, please contact your Sony representative.
For more information about the cable specification required and about the connection, see
"Connection Cable Specifications for Color Temperature Probes" on page 119.
Sets whether or not to adjust the color temperature and contrast (backlight) at the same time.
Off: Contrast is adjusted.
[On]: Contrast is not adjusted.
Copies the other color temperature.
Copies other data in this monitor.
When the item is selected, you can select from D93, D65, User1, User2, User3, User4 or
User5.
D93: Copies the color temperature of D93.
D65: Copies the color temperature of D65.
User1 to 5: Copies the color temperature of User1 to 5.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
Copies data from another monitor.
Enter the ID number of the source monitor.
When the NETWORK switch is set to PEER TO PEER, this is not selectable.
When the ID number is entered, you can select from D93, D65, User1, User2, User3, User4
or User5.
D93: Copies the color temperature of D93.
D65: Copies the color temperature of D65.
User1 to 5: Copies the color temperature of User1 to 5.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
Copies data in the "Memory Stick".
When the item is selected, the file names in the source "Memory Stick" are displayed.
When the file is selected, you can select from D93, D65, User1, User2, User3, User4 or
User5.
D93: Copies the color temperature of D93.
D65: Copies the color temperature of D65.
User1 to 5: Copies the color temperature of User1 to 5.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
Resets the color temperature to the default setting.
You cannot select this when the setting is the default value.
The following message appears to confirm the data reset operation.
Restore factory data?
OK: To reset the data, press the ENTER (Ent) button.
Cancel: To cancel, press the MENU button.
]: factory setting)
Advertisement
Table of Contents
