Door Phone - Toshiba Strata DK 280 Installation Manual
Digital business telephone system
Hide thumbs
Also See for Strata DK 280:
- User manual (79 pages) ,
- Quick reference manual (4 pages) ,
- System administration manual (60 pages)
Table of Contents
Advertisement
To Answer a Door Phone
Call:
You will hear a distinctive
ringing tone.
Lift the handset.
Dial the door
phone
Directory Number if not
connected yet.
Hang up when the call
is completed.
Door
Phone
Door phones can be used to call digital and electronic telephones selected in
system
programming.
You can call a door phone and monitor
the area
surrounding the door phone.
Your phone will ring five times or only once, depending on system programming.
Note:
To pick up doorphone
calls that are ringing at a station other than yours,
/~ressa[DN]+#5#30.
If you lift the handset while the door phone is still ringing, your [DN] LED will
flash at the in-use rate and you will be connected to the door phone.
Calling/Monitoring
a Door
Phone
To Call/Monitor a Door
Phone:
Lift the handset.
Press a [DN].
Dial the Directory
Number for the desired
door location.
Hang up when the call
is completed or when
you are finished
monitoring.
You will hear dial tone and the LED will flash at the in-use rate.
DN
DN
#151
Location
#157
Location
#152
Location
#I53
Location
#154
Location
#158
Location
#159
Location
#161
Location
#155
Location
#156
Location
Door Phone [DNs]
#162
Location
#163
Location
Door Phone [DNs]
Note:
Door phone [DNs]
can be stored
on SD buttons.
See Appendix
A-Table
4.
To Make a Call from a Door
Phone:
1. Press the door phone
button and then release
It.
2. When answered, speak
at a normal voice level
in the direction of the
door phone.
To Output * and # DTMF
Tones:
l
While on an outside
call, press *, then
press #.
To Activate Group
Listening:
This feature enables you to set your telephone so that you and people near your
telephone can hear the distant party over the speaker, but the distant party will
not be able to hear you.
1. Establish an off-hook
call with a distant party.
2.
Hold down SPKR.
The SPKR LED will light red and the distant party's voice will be heard over the
speaker of the telephone. but the distant party will not hear you.
3.
Stop pressing SPKR to
The SPKR LED will turn off. The telephone speaker will be deactivated and the
talk to the distant party
handset will be activated.
You can alternate between parties as long as the
through the handset.
handset is on-hook.
Calling from a Door Phone
You will hear a distinctive ringing tone-five
times or once, depending on system
programming.
DTMF
Tone
Dialing
with
* and #
You may have to send * and # Dual-tone Multi-frequency
(DTMF) tones to some
devices or services,
such as a voice mail device or computer output service. It
you do not have the SDS button on your telephone, you must first dial an access
code to enable these tones to be transmitted.
DTMF tones are automatically
enabled on stations with the SDS button.
You will now be able to output + and # and DTMF tones, as well as diglts 0 - 9.
These tones do not go out immediately. They will go out after this procedure for
the duration of the call.
This feature disables the Speed Dial feature. Speed Dial will be restored when
you complete the call or place it on hold.
Group
listening
54
55
Hide quick links:
Advertisement
Chapters
Table of Contents
