Toshiba Strata DK 280 Installation Manual page 563
Digital business telephone system
Hide thumbs
Also See for Strata DK 280:
- User manual (79 pages) ,
- Quick reference manual (4 pages) ,
- System administration manual (60 pages)
Table of Contents
Advertisement
Program 81 - 89 -
Ground/loop
Start/CO
line/Station
Auto
Attendant,
Attendant
Console,
and Distributed
Hunt
Group
Ringing
Assignments
SELECT
= Prg 04 Port Number(s)
or Prg *04
DH
Group(s)
Port Ref. No.that must ring (000 - 239 or 900 - 915)
Assigned
to ring selected
station port or DH Group
number(s).
See Note 1 to select CO line ranges.
Selected
trunks ring
selected
station ports
per ringing program
options as follows:
earare
tl a Immediate
!J 1 z-second
delay
econd delay
IDAY2[
80
12-second
delay
8
q
2Csecond
delay
(NIGHT1
8
q
Immediate
8
q
12-second
delay
8
q
24-second
delay
Check
Off the CO line and Port-Range
Covered
by this Record
Sheet
CO line Range
001 - 040-
041 - 080-
081 - 120-
121 - 144-
Port Range
000-039-
040-079-
080-119-
120-159-
160-199-
200-239-
Port Range
000 - 039-
Copy this page for more CO line and ports. (Ports
include Station (000 - 239)3 and Distributed
Hunt Groups
(900 - 916).2
15
-
14
A
13
12
11
-
IO
0":
--
04
03
-
02
____.
01
Notes:
DK0397
1. To turn all CO LEDs on or off, after the port number
is entered,
press the
VolA
(all LEDs on) or
VolV
(all LEDs off). To
check a particular
CO line, after the port number
and # is entered,
press
Mode
and enter the CO line number,
then use
the # button to display and advance.
2. Program
81 - 89 assigns
CO lines to ring the telephones
or DH Groups,
use Programs
*81, *84 and *87 to cause CO
lines to flash the appropriate
[PDN] and/or [PhDN]
buttons
as required.
If the CO line or Pooled Line button appears
on a
telephone,
do not use Programs
*81, *84 or *87 to assign [ON] LEDs to flash - this will cause both the CO line and [DN]
button to flash on the telephone
when the CO line rings on an incoming
call.
3. CO lines that must ring DH groups must be assigned
to ring the DH group (900 - 915) and the DH Group telephone
[PDN]
or [PhDN]
in Programs
*81, *84, and *87, if the CO line button or Pooled Line buttons appear
on the DH Group member
telephones,
then Program
*81, *84 and *87 assignments
are not necessary.
Do not assign DH group
member
station
ports in Program
81 - 89.
General
Notes:
l
Initialized
data reads all LEDs ON for Port 000 in Program
81 andport
001 in Program
87; all other LEDs are OFF.
l
Program
87 w 89 can be used to set-up DK280 built-in Auto Attendant
delay ring feature per the guide on the next page.
l
Program
81 - 89 are used to ring individual
attendant
consoles
and/or to enable attendant
console incoming
CO line call
load sharing.
(See the next page
and Chapter
5-Station
Apparatus,
Subsection
5.8.2 of the DK280
Installation
and
Maintenance
manual.)
9
See CO line ringing control logical diagrams
that follow *81, *84, and *87 record sheets.
'
IMPORTANT
!
120 telephones
maximum
can be programmed
to ring in any one mode (Day/DayZNight)
per CO line.
February
1996
1 o-1
49
Hide quick links:
Advertisement
Chapters
Table of Contents
