Toshiba Strata DK 280 Installation Manual page 670
Digital business telephone system
Hide thumbs
Also See for Strata DK 280:
- User manual (79 pages) ,
- Quick reference manual (4 pages) ,
- System administration manual (60 pages)
Table of Contents
Advertisement
Manual
Connection
Via Call Transfer
1.
Using a telephone
(at the remote
location)
that
can switch to the terminal/modem,
dial the number
of a system CO line.
2.
When
the call is answered,
request
that it be
transferred
to station #I 9 (the RMDS or IMDU).
3.
After the call is transferred
and communication
is
established
with the RMDS or IMDU, switch the
call from the telephone
to the terminal/modem
(type ATD-x3-
and press Enter
from the
remote
terminal).
4.
Observe the following:
+
When the CO line is transferred,
it will connect
to the RMDS or IMDU.
+
The RMDS or IMDU and the remote
modem
will respond
to each other with modem tone;
communication
is established.
+
When
communication
is established,
the
terminal
will
display:
CONNECTED
or
COMMUNICATIONS(~~~
Note).
5.
To continue, enter the security code pas described
below.
Note:
If the
connection
is not
completed
or
communication
is unsuccessful,
the remote
terminal will display: NO CARRIER.
If this is
the
case,
check
that
the
equipment
is
installed per Subsection
13.5.2 or 13.6.2 and
try again.
Once communication
is established
between
the
remote
terminal
and the RMDS or IMDU,_follow
the
steps below to enter the security code and receive the
Mode
prompt.
1.
Set the keyboard for Caps
Lock on.
2.
Press Enter.
+
The
system
responds,
and the terminal
displays:
DK CONNECT
XODE
Note:
The software
version number
is identified
in
Program 00.
3.
Enter
the four-digit
security
code
and
press
Enter.
+
The
system
responds,
and the
terminal
displays:
OK
MODE
January
1996
13-7
Hide quick links:
Advertisement
Chapters
Table of Contents
