Table of Contents
Advertisement
Note: If the choke lever is set to the C
start the engine, gradually move the choke lever back toward
the O
position as the engine warms up. If the engine
PEN
stalls or hesitates, move the choke lever back toward the
C
position until the engine runs smooth. Allow the
LOSED
engine to warm up, then move the choke lever to the O
position; refer to
Choke Lever (page
Shutting Off the Engine
WARNING
In an emergency situation, shut off the engine
immediately.
Important: During normal operation, if the engine
has been working hard or is hot, let it idle for a minute
before shutting off the engine. This helps to cool the
engine before shutting off.
1. Ensure that the choke lever is in the O
(Figure
34); refer to
2. Move the throttle lever to the M
34); refer to
Throttle Lever (page
3. Rotate the engine switch to the O
Engine On/Off Switch (page
Controlling the Paddles
DANGER
This machine is capable of amputating hands.
• Stay in the operator's position while the machine
is running.
• Keep all bystanders a safe distance from the
machine.
• Stop the machine immediately if any people or
animals enter the work area.
• Never place any part of your body into a position
that causes an unsafe operating condition.
G019747
Figure 35
position to
LOSED
12).
position
FF
Choke Lever (page
12).
position
IN
12).
position; refer to
FF
12).
Use the clutch lever to control the power transmission to the
paddles of the machine.
Controlling the Paddles—Belt-drive
Models
Models 68017C and 68021C only
PEN
1
1. Off position
(Figure
24
2
Figure 36
2. On position
G019873
Advertisement
Table of Contents
