Table of Contents
Advertisement
Overview
3
Serial Number Locations
The Serial Number (SN) and the Media Access Control (MAC) address for the Secure Web Appliance S196,
S396, S696, and S696F are printed on the top of the pullout asset card located on the front panel as shown in
the following figure of the Secure Web Appliance S196. The PID (Product ID) and VID (Version ID) are
printed on the back of the pullout asset card.
Figure 4: Serial Number on Pullout Asset Card
1
The serial number is also on the label on the cover of the chassis as shown in the following figure.
Cisco Secure Web Appliance S196, S396, S696,
S696F
This document contains URLs that point to the
hardware installation guide, regulatory
compliance and safety information guide, the
getting started guide, and a QR code that points
to the secure web appliance Documentation
Portal.
Front of the pullout asset tag with the SN and
MAC address
Cisco Secure Web Appliance S196, S396, S696, and S696F Hardware Installation Guide
4
Two 10-Gb SFP+ fiber optic transceivers with
cables
Note
Supported on the S696F. You
cannot mix SFP transceiver types in
the same chassis. 1-Gb SFPs are not
supported on the S696F.
2
Bottom of the pullout asset tag with the PID and
VID numbers
Serial Number Locations
5
Advertisement
Table of Contents
