Table of Contents
Advertisement
Rear Panel LEDs
1
Data interface link speed:
• Off—Link speed is 100 Mbps.
• Amber—Link speed is 1 Gbps.
• Green—Link speed is 10 Gbps.
3
Data interface link speed:
• Off—Link speed is 100 Mbps.
• Amber—Link speed is 1 Gbps.
• Green—Link speed is 10 Gbps.
5
Rear unit identification:
• Off—The unit identification function is not
• Blue, flashing—The unit identification
7
Management interface link status:
• Off—No link is present.
• Green—Link is active.
• Green, flashing—Traffic is present on the
5
Management interface link status:
• Off—No link is present.
• Green—Link is active.
• Green, flashing—Traffic is present on the
Cisco Secure Web Appliance S196, S396, S696, and S696F Hardware Installation Guide
16
in use.
function is activated.
active link.
active link.
2
Data interface link status:
• Off—No link is present.
• Green—Link is active.
• Green, flashing—Traffic is present on the
active link.
4
Data interface link status:
• Off—No link is present.
• Green—Link is active.
• Green, flashing—Traffic is present on the
active link.
6
Management interface link speed:
• Off—Link speed is 100 Mbps.
• Amber—Link speed is 1 Gbps.
• Green—Link speed is 10 Gbps.
4
Management interface link speed:
• Off—Link speed is 100 Mbps.
• Amber—Link speed is 1 Gbps.
• Green—Link speed is 10 Gbps.
6
Power supply:
• Off—No AC input (12-V main power off;
12-V standby power off)
• Green, flashing—12-V main power off; 12-V
standby power on.
• Green—12-V main power on; 12-V standby
power on.
• Amber, flashing—Warning threshold
detected but 12-V main power on.
• Amber—Critical error detected; 12-V main
power off ( for example, overcurrent,
overvoltage, or overtemperature failure).
Overview
Advertisement
Table of Contents
