Table of Contents
Advertisement
Rack-Mount the Chassis
Warning
Step 1
Attach the inner rails to the sides of the chassis:
a) Align an inner rail with one side of the chassis so that the three keyed slots in the rail align with the three pegs on the
side of the chassis.
b) Set the keyed slots over the pegs, and then slide the rail toward the front to lock it in place on the pegs. The front slot
has a metal clip that locks over the front peg.
c) Install the second inner rail to the opposite side of the chassis.
Figure 34: Attach the Inner Rail to the Side of the Chassis
1
Front of chassis
Step 2
Open the front securing plate on both slide-rail assemblies. The front end of the slide-rail assembly has a spring-loaded
securing plate that must be open before you can insert the mounting pegs into the rack-post holes.
On the outside of the assembly, push the green arrow button toward the rear to open the securing plate.
Figure 35: Front Securing Mechanism on the Inside of Front End
1
Front mounting pegs
3
Securing plate shown pulled back to open position
Statement 1098—Lifting Requirement
Two people are required to lift the heavy parts of the product. To prevent injury, keep your back straight
and lift with your legs, not your back.
Cisco Secure Web Appliance S196, S396, S696, and S696F Hardware Installation Guide
2
Locking clip on inner rail
2
Rack post
—
Rack-Mount the Chassis
35
Advertisement
Table of Contents
