Table of Contents
Advertisement
Maintenance and Upgrades
Step 1
Remove the power supply that you are replacing or the blank panel from an empty bay:
a) Do one of the following actions:
• If the chassis has one power supply, shut down and remove power from the chassis. See
Down, on page 37
• If the chassis has two power supplies, you do not have to shut down the chassis.
b) Remove the power cord from the power supply that you are replacing.
c) Grasp the power supply handle while pinching the release lever toward the handle.
d) Pull the power supply out of the bay.
Figure 40: Remove and Replace the AC Power Supply
1
Release lever
Step 2
Install a new power supply:
a) Grasp the power supply handle and insert the new power supply into the empty bay.
b) Push the power supply into the bay until the release lever locks.
c) Connect the power cord to the new power supply.
d) If you shut down the chassis, press the Power button to return it to main power mode.
for the procedure.
Cisco Secure Web Appliance S196, S396, S696, and S696F Hardware Installation Guide
Remove and Replace a Power Supply
2
Handle
Power Button Shut
45
Advertisement
Table of Contents
