urbanista Stockholm Plus - True Wireless Manual

Also See for Stockholm Plus:

Manual (43 pages)

Table of Contents

Contents

1 OVERVIEW
2 URBANISTA HELP CENTER
3 FIRST TIME PAIRING
4 RESET EARPHONES
5 CONTROLS
6 CHARGING
7 Documents / Resources
- 7.1 References
- 7.2 Download manual

urbanista Stockholm Plus - True Wireless Manual

OVERVIEW

URBANISTA HELP CENTER

Thanks for choosing an Urbanista product!

If you have any questions, which you can't find the answer for in this manual, please check our online help center which not only have an online version of this manual but also FAQ's of frequently asked questions. https://support.urbanista.com/

FIRST TIME PAIRING

Place earbuds into charging case and remove them again, the indicator of the right (R) earphone will flash slowly.
Open the Bluetooth settings on your device and select "Urbanista Stockholm Plus" you will receive a "connected" voice message when pairing is successful.

RESET EARPHONES

Delete "Urbanista Stockholm Plus" from the Bluetooth settings on your device.
Press and hold the Urbanista logo button inside the charging case (1) for 10 seconds with the earbuds still inside the case, until the 4 battery indicator lights flash simultaneously (make sure that the charging case has enough power). Close the charging case - the reset has now been successfully completed.
Follow the instructions in "First Time Pairing" section, to reconnect the earphones to your device.

CONTROLS

Via the logo button

TURN ON - Open the charging case OR Touch and hold the left (L) and right (R) logo for 2 seconds. The indicator light will flash blue three times.

TURN OFF - Place earphones in the charging case and close the lid OR Touch and hold either the right (R) or left (L) logo for 10 seconds. The indicator light will flash blue three times.

TURN ON VOICE ASSISTANT - Touch the right (R) logo twice.

TURN OFF VOICE ASSISTANT - Touch the right (R) logo twice.

ANSWER A CALL - Touch the logo twice on the right (R) or left (L) earphone.

END A CALL - Touch the logo twice on the right (R) or left (L) earphone.

REJECT A CALL - Touch and hold the logo on the right (R) or left (L) earphone for 2 seconds.

PLAY MUSIC - Touch the logo twice on the left (L) earphone.

PAUSE MUSIC - Touch the logo twice on the left (L) earphone.

ADJUST THE VOLUME (+) - Touch the logo once on the right (R) earphone.

ADJUST THE VOLUME (-) - Touch the logo once on the left (L) earphone.

SKIP A TRACK FORWARD - Touch and hold the logo on the right (R) earphone for 2 seconds.

SKIP A TRACK BACKWARD - Touch and hold the logo on the left (L) earphone for 2 seconds.

Both earbuds have a built-in microphone and can be used as a single earpiece if needed

CHARGING

The earbuds charge automatically when placed in the charging case. Once fully charged, the blue indicator light on the earphones (2) will switch off. You can charge your earbuds five times before you need to recharge your case. When opening the lid to the case, the four battery indicator lights (3) display how much power capacity the battery has:

BATTERY LEVEL:

0-25%:	One light lit
26-50%:	Two lights lit
51-75%:	Three lights lit
76-100%:	Four lights lit

CHARGE THE CASE - To charge the case - Plug the USB type- C cable into an energy source.

0-25%:	One light flashes
26-50%:	The first light is lit, the second light flashes
51-75%:	The first two lights are lit, the third light flashes
76-100%:	The first three lights are lit, the four light flashes
100%:	Solid light

If the battery indicator lights do not work as described, please disconnect the charger from the charging case and reconnect it.

LOW-POWER WARNING - When your battery power is running low, there will be a "beep" and 15 minutes playtime left before the earphones power off automatically.