urbanista London - Earbuds Manual

OVERVIEW

URBANISTA HELP CENTER

Thanks for choosing an Urbanista product!
If you have any questions, which you can't find the answer for in this manual, please check our online help center which not only have an online version of this manual but also FAQ's of frequently asked questions. https://support.urbanista.com/

PAIRING MODE

FIRST TIME PAIRING

To connect the earphones to a Bluetooth device for the first time - open the charging case whilst the earbuds remain inside the case. The earphones will automatically enter pairing mode.

Open Bluetooth settings on your device and select "Urbanista London". You can now enjoy your music and make phone calls using your Urbanista London.

If pairing is not established within 5 minutes, pairing mode is cancelled and the procedure must start over.

EARBUDS

PLAY - Tap the logo (1) on the Left (L) earbud twice.

PAUSE - Tap the logo (1) on the Left (L) earbud twice.

VOLUME (+) - Tap the logo (1) on the Right (R) earbud.

VOLUME (–) - Tap the logo (1) on the Left (L) earbud.

ANSWER INCOMING CALL - Touch the logo (1) on the Left (L) or the Right (R) earbud twice.

END A CALL - Touch the logo (1) on the Left (L) or the Right (R) earbud twice.

REJECT A CALL- Touch and hold either the logo (1) on the Left (L) or the Right (R) earbud.

SIRI - Touch the logo (1) on the Right (R) earbud twice.

ACTIVE NOISE CANCELLING ON/OFF - Touch and hold the logo (1) on the Right (R) earbud for 2 seconds.

AMBIENT VOICE MODE ON/OFF - Touch and hold the logo (1) on the Left (L) earbud for 2 seconds.

EAR DETECTION - Built in sensors will make the music stop automatically if one earbud is removed from your ear. The auto play function will kick in once you put the earphone back in your ear and the music will start to play again. Once removed from your ear, the touch button function will be disabled. Phone calls will not be terminated although if one earbud is removed from the ear.

BATTERY STATUS INDICATOR - After closing the lid of the charging case, the battery status indicator lights (3) will display the remaining battery level.

LOW-BATTERY WARNING - When your battery power is running low, there will be a voice prompt "low battery" and 30 minutes playtime left before the earphones turn off auto- matically.

CHARGING

The earbuds will charge automatically when placed in the case. The battery indicator lights (3) will flash once when the earbuds are placed in the case. The outer indicator lights will flash every 10 seconds until the earbuds are fully charged.

TO CHARGE THE CASE - Plug in the type-C cable to an energy source or place the case on any Qi-certified charging pad. The battery indicator lights will flash subsequently until fully charged. Once fully charged the battery indicator lights will be lit continuously.

If the battery indicator lights do not work as described, disconnect the charger from the charging case and reconnect it.

SILICONE BUDS - The complimentary silicone ear buds come in different sizes. Choose the size that suits your ears best so that they fit comfortably in your ears and provide effective noise cancelling of ambient sounds. For cleaning, pop the silicone tip off and soak them in lukewarm water with soap. After soaking, use a cotton swab to give them a better cleaning. Rinse the tips well under water and dry with a cloth. Do not put them back on the earbuds until they are completely dry.

RESET – Delete the "Urbanista London" from the Bluetooth settings on your device. Press and hold the Urbanista reset button (2) for 10 seconds, whilst the earbuds remain inside the case, until the 4 battery status indicator lights (3) flash at same time (make sure that the charging case has enough power). Close the charging case, the reset is now successfully completed.

Follow the instructions in "First Time Pairing" section to reconnect the earphones to your device.